MMKB

When making edits to long standing statements or facts on the wiki, you MUST PROVIDE CREDIBLE SOURCES FOR YOUR CLAIMS. edits done without will be UNDONE, NO REASONS GIVEN. Please use the talk pages to provide these sources before editing!

READ MORE

MMKB
Register
Advertisement

Z-Saber (ゼットセイバー Zetto Seibā), also written as Z Saber, is Zero's main weapon in the Mega Man X and Mega Man Zero series. It is a powerful sword with a green (blue in most non-in-game artworks) energy blade. Zero receives the weapon in Mega Man X2 after he was remodeled by the X-Hunters, and has appeared in every chronological game since. Zero performs most of his techniques with the Z-Saber, his most recurring techniques being a rising slash, a downward stab, a dashing thrust or slash, and a rolling slash.

Mega Man X series

In Mega Man X2 and Mega Man X3, this weapon is known as the Beam Saber (ビームサーベル Bīmu Sāberu) (sometimes Beam Sabre). In Mega Man X2, Zero releases a shockwave from the Beam Saber after using two Charge Shots, and he uses a dashing slash. In Mega Man X3, Zero uses the Beam Saber when he fully charges his attack, hitting nearby enemies directly and releasing a shockwave at distant enemies.

Mega Man X can also use the Beam Saber in Mega Man X3. To obtain it, Zero must pass through the one boss door that he can enter in the entire game. It's found on the second station of Dr. Doppler's fortress, and is the first door in the level. It leads to the sub-boss Mosquitus. Defeating the sub-boss with Zero will cause him to be severely injured by its explosion. Zero will then pass the Beam Saber to X before teleporting out to Dr. Cain's lab, becoming unavailable afterwards. Of course, losing Zero results in the "bad" ending. To use the Beam Saber, X must fully charge his buster - it does optimal damage and is considered the game's ultimate weapon.

X4 zerostand

Zero with the Z-Saber in Mega Man X4

Before Zero's destruction at the end of Mega Man X5, the Z-Saber had a rather fluid-formed blade, less like a saber in the actual sense due to its irregular energy flow. After his resurrection in Mega Man X6, Zero's new Z-Saber has a more solid energy blade.

The fluid-shaped Z-Saber is found by X in the end of Mega Man X5 and used by him in the following game by pressing the Special Weapon button without one equipped. However, not being experienced with the Z-Saber as Zero, X has a rather slow recovery time from slashing as he uses Zero's original third-input slash on the ground (while still using his original horizontal slash in midair). Zero Nightmare also uses a fluid blade. It's unknown what happened to the original Z-Saber after Zero reappeared.

The Z-Saber can be used on the ground and in mid-air and can perform combo attacks; however, the normal slashes (and the combos) force Zero to stand still. His default combo in X4-to-X5 is normally a downward slash-to-outward slash done via his following arm then a forward-leaning downward two-handed chop that does three hits. The crouching attack is an inward sweeping slash while the midair slash is an outward swing angled a bit downward (which changes its animation slightly when done as he lands). This in X6 changes to an inward cut, downward-outward cut then a two-handed launching-lift slash to the background (which inflicts 3 hits); the crouching slash changes into an outward sweeping-slash, and the midair slash is a midair version of his original downward 3-hit slash (which resembles an altered version of it when performed as he lands).

The techniques obtained from defeated bosses usually are assigned to different elements, such as fire, ice, and lightning, and those attacks are executed by fulfilling certain button combinations while being in a certain situation (for example, being in mid-air). When not used, Zero stores the deactivated Z-Saber hilt in a special sheath-like element located on his back (where in canon artwork barring his ambidextrous sprites, Zero has the sheath behind his left shoulder), although in Mega Man X7 and Mega Man X8, he keeps it out and activated as long as it is equipped (In the case of Mega Man X8, Zero has the sheath over his right shoulder in gameplay).

In Mega Man X: Command Mission, Zero can use several types of swords besides the Z-Saber, all of which are Combat type weapons that hit a single target. The Z-Saber is Zero's initial weapon, a beam saber that he uses to attack with a Double Slash combo. As the game progresses, Zero has access to better versions of the weapon, the Z Saber+, Z Saber++, and Z Saber+++.

In Tatsunoko vs. Capcom and Marvel vs. Capcom 3, Zero uses the fluid Z-Saber version from Mega Man X2 to X5. He also reuses the whole standard saber slash attack set as follows from X4-to-X5: default neutral combo is his standing light, medium and heavy respectively, crouching medium is his crouching slash and jumping medium is his midair slash; however these animations are all altered perspective-wise due to Zero unsheathing the Z-Saber from his leading shoulder instead of his following shoulder like in the 2D games (while canonically and in artworks as aforementioned, behind his left shoulder is where he holsters the saber when inactive).

In Marvel vs. Capcom: Infinite, Zero's moveset with the Z-Saber is altered; especially via a new command normal by the name of Koketsuga, where it is Zero's original crouching heavy attack (where he rolls along the ground at an angle to sweep-slash at his foe's feet). In both Marvel vs. Capcom 3 and Marvel vs. Capcom: Infinite, there is a midair version of the attack that acts as Zero's primary air combo finisher.

Mega Man Zero series

The Z Saber is one of the Ten Shining Weapons, and like Zero, its whereabouts had been unknown until the Cyber-elf X gave it to Zero in the beginning of the first Mega Man Zero game. The Z Saber has been redesigned and reconfigured along with Zero himself, now possessing a triangle-shaped blade. Furthermore, the Z Saber received a few more upgrades. Unlike in the X series, the Z Saber now can be used while moving (however, no combos can be performed while in motion) and can even be charged for a smash-like attack due to the X-Buster technology embedded into the saber. The Z Saber is also customizable, allowing the Resistance member Cerveau to make it the basis of the rest of Zero's arsenal in the series[1] except for the Buster Shot (which is still combined with the Z Saber as source for its energy ammunition) and the Zero Knuckle. Some Mega Man Zero series sources, such as Recoil Rod's artwork, indicate that in this series Zero actually uses at least two Z Sabers. According to concept arts, the Z Saber(s) is/are stored within the holsters located on Zero's hips. The Z Saber can be equipped with different chips for element-based charge attacks.

The weapon's most interesting characteristic is the sheer amount of force it can dole out to enemies; it is able to easily slice through 300 mm of reinforced steel in a single stroke. The Z Saber is also unique in the fact that it apparently doesn't require an energy source to operate. In Mega Man Zero 2, Zero spends around a year far away from any energy source and the Z Saber is still in full operating condition; though, knowing that Zero has an internal reactor, it is possible that the saber can be recharged by drawing energy from Zero himself.

In the first two games, Zero has to "relearn" his skill with the Z Saber, upgrading its attack power and moveset by frequently using it against enemies, thus leveling it up. In the first game, Zero can also learn two rolling slash attacks by defeating several enemies with the Z Saber while jumping or dashing. The rolling slashes aren't learned in Mega Man Zero 2, but they are still available by using the Active Form.

Image Skill level Description
1
1 Zero can perform a single slash while standing, walking, dashing, jumping or sliding down a wall. By pressing down while holding the attack button in the air, Zero holds the Z Saber while falling.
2
2 Zero can perform a double slash.
3
3 Zero can perform a triple slash.
Charge
4 Zero can charge his slash.
Charge
5 The Z Saber charges faster.
Jump
* Zero can perform a rolling slash while jumping. Obtained by destroying enemies using the Z-Saber in a jumping move.
Dash
* Zero can perform a rolling slash while dashing. Obtained by destroying enemies using dashing Z-Saber attacks.

The skill level up system isn't present in Mega Man Zero 3 and Mega Man Zero 4, but Zero begins the games capable of using the three slash combo and charge the Z Saber. He can also use other enhancements by using Hacker Cyber-elves in Zero 3 and Body Chips in Zero 4.

up
down

In Mega Man Zero 3, Zero can use the jumping and dashing rolling slashes by using the Cyber-elf Malthas. He can also use an upward slash like the Shoenzan by using the Cyber-elf Lizetus, and release a shockwave similar to Kougenjin by using the Cyber-elf Cottus. The Cyber-elf Ilethas allows Zero to stop some energy shots by slashing them. The Z Saber can be powered by using the Cyber-elf Sabras and the Mod Cards 4, 40, and 79. In Mega Man Zero 4, the Body Chip Rolling allows Zero to use the rolling slashes, the Body Chip Erase allows him to stop some energy shots with the Z Saber, and the Body Chip Reflect reflects the shots back to the enemy.

Zero also uses the Z Saber in SNK vs. Capcom: SVC Chaos and Onimusha Blade Warriors.

Mega Man ZX series

The Model Z Mega Man has a Z Saber as the main weapon. The series also contains the similar ZX Saber from Model ZX and OX Saber from Model OX.

Mega Man Legends series

The Zetsabre is one of the items needed to create the Blade Arm in Mega Man Legends and Mega Man Legends 2.

In the first game it is a toy sword, its description from the Japanese version saying that it is from an anime called "Rockman Zero". It can be obtained by winning the Beast Hunter mini-game from Kattelox Island's TV station with a high rank.

In the second game the mayor from Pokte Village says that the Zetsabre is a legendary shining sword that was used by a hero who saved the village long ago and was handed down in her family over the years. Mega Man Volnutt can either buy it for two million Zenny or gain it as a prize for answering all 100 questions from her quiz correctly.

Mega Man Battle Network series

Zero.EXE's Z-Saber

Z-Saber

In Mega Man Network Transmission, Zero.EXE uses a Z-Saber in combat, and it has a Battle Chip that can be used by MegaMan.EXE.

Mega Man Zero Z Saber

The Z Saver (sic) from the Mega Man Zero series is a Battle Chip in Mega Man Battle Network 4, Rockman EXE 4.5 Real Operation and Mega Man Battle Network 5. The user attacks three times with a long 1x2 slash, a wide 3x1 slash, and a 1x3-3x1 "|-" slash, each causing 100 damage. If the player starts the attack by holding the A button and press left+B in the third slash, the NetNavi will use a fourth attack, a wide sonic boom.

Mega Man Battle Network 4:

ID Battle Chip Description Damage Element Rarity Code Memory Location
Secret Chip 38
(Mega Chip)
SC ZSaver Repliroid swrd cuts 3 times 100 Type Sword ***** Z 80 MB Traded with Mega Man Zero 3.

Rockman EXE 4.5 Real Operation:

ID Battle Chip Description translation Damage Element Rarity Memory Location
Mega Class Chip 80 80 Z Saber "Legendary red Repliroid's triple cutting sword" 100 Type Sword ***** 80 MB ?

Mega Man Battle Network 5:

ID Battle Chip Description Damage Element Rarity Code Memory Location
Mega Chip 18 18 Z Saver Repliroid swrd cuts 3 times 100 Type Sword ***** Z 80 MB Liberation Mission 6

Advanced PET:

ID Battle Chip Class CP AT Element Location
218 218 Z Saber Mega ? ? N Neutral Rockman.EXE 4.5 Real Operation Battle Chip Gate Pack

Progress PET:

ID Battle Chip Class CP AT Element Location
730 730 Z Saber Mega ? ? N Neutral ?

Other appearances

  • The OVER-Z armor from Rockman Xover is based on Zero and carries a large sword.
  • In the cancelled game Rockman Online, each Zero type Reploid is equipped with a Z-Saber.

Other media

The Z-Saber appeared in most media featuring Zero, including the Rockman X manga, the Rockman Zero manga and the Rockman X Mega Mission cards.

In the MegaMan NT Warrior anime series, the Z Saber Battle Chip from the Mega Man Zero series is used by Chaud and ProtoMan in some episodes from Rockman.EXE Beast. Also, Zero.EXE appears with his Z-Saber in Rockman.EXE Beast+.

In the Archie Comics, the Z-Saber is given a light nod in issue 40 of the Mega Man comic's "Dawn of X" storyline, when Zero uses Sigma's saber to help take down the Wily Walker. Sigma comments that Zero should consider getting a saber of his own some day. Zero eventually obtained his own saber and uses it during Worlds Unite.

Trivia

  • The Z-Saber despite being a laser blade-type weapon, has exhibited a normal slashing sound upon contact with its victims; games such as SvC Chaos, Tatsunoko vs. Capcom and Marvel vs. Capcom 3 have made it evident in that the Z-Saber seems to cut akin to a normal bladed-weapon upon striking an opponent with it.

Gallery

References

Advertisement